Configuring The Camera And Network - UTC 1070140-EN User Manual

Icon Function
System configuration
Video ports
Network interfaces

Configuring the camera and network

Use this menu to configure the camera and network parameters.
Using the mouse, click the
screen displays five icons. By default, the Network Configuration screen is
shown. Clicking each icon will display a different screen that allow you to
configure different parameters. See Figure 7 on page 16.
The system will prompt you to reboot in order for any changes made to take
effect. Click Restart
UltraView IP Box Day/Night Range Camera User Manual
Description
Displays information on the system configuration and
status. The items listed are:
• Equipment name
• Serial number of the device
• Software revision
• U-boot revision
• Software recovery revision
Displays information on the video ports status and
configuration. The items listed are:
• Label
• TCP port
• Format. Shows PAL or NTCP
• Size
• FPS. Frame rate
• Bandwidth
• Status. Normal status is displayed in green.
Abnormal status is displayed in red.
Displays information on the network configuration and
status. The items listed are:
• Type
• IP/Mask
• Cable status
• Tx packets
• Tx errors
• MAC address
• Default Gateway
• Ethernet configuration
• Rx packets
• Rx errors
Administration
in the toolbar to reboot the system.
option in the menu toolbar. The
15