UTC 1070140-EN User Manual page 19

Icon Function
Video port format
Change administrative
password
File firmware update
Configuration download
UltraView IP Box Day/Night Range Camera User Manual
Description
Defines the video format used, PAL or NTSC.
Check one of the format boxes. Click
changes.
Note: This parameter is unavailable if the camera has
been configured through a Central Configuration
Server or VisioWave Security Center.
Defines the administrative password used to access
the system. The factory default admin password is
"admin". It is recommended that is this changed for
security reasons.
Note: Keep the admin password in a safe place. If
you should forget it, you must reset the camera
configurations to default by pressing the Reset button
on the rear of the camera.
In the Enter old password
admin password. In the
box enter the new admin password and confirm it.
Click the Change administrative password
to save the changes.
In the menu toolbar then click the
Restart screen appears. Click
system to implement the changes.
Updates the firmware.
The camera firmware is stored in the flash memory.
Use this option to write the firmware into the flash
memory.
When you upgrade the firmware, all existing settings
are unchanged. Only the new features are added with
their default settings.
Click the Browse button the locate the updated
firmware and then press the
start the update.
Lists all the configuration information.
You can download it to a file on your computer or
another location. Click the
button to download this information and enter the
download destination.
OK to save the
edit box enter the current
Enter new password edit
button
Restart option. The
OK to reboot the
Upload firmware file
Save the configuration
to
17