UTC 1070140-EN User Manual page 12

Mirror
Use this function to change the original image into a mirror image (horizontal).
Flickerless control
Flickerless control eliminates the flicker caused by the differences between the
frequencies (60 Hz) of the ionization of the gas in a fluorescent light bulb with
that of the vertical frequency (59.95 Hz) in the camera. Although the difference is
very small, it results in a slight flicker at the top of the monitor scene or, in video
over IP applications, it would be interpreted as motion. Flickerless control helps
reduce the file size and transfer bit rates of compressed video images.
Reset button
Use this button to reset the camera to factory defaults including camera and
network settings. With the camera powered on press the red reset button for 10
to 15 seconds. The red LED indicator light flashes when the reset signal is
accepted.
10 UltraView IP Box Day/Night Range Camera User Manual