Power Failure - Panasonic Workio DP-C262 Facsimile Manual

Power Failure

Power Failure
The fax display remains off for the duration of a power failure, and you cannot send or receive
documents.
FAX • When a power failure
occurs
• While a power failure
persists
When power recovers
When External • When a power failure
Telephone is occurs
connected
• While a power failure
persists
If a power failure occurs while scanning a document, the scan is cancelled. Rescan the document when power
recovers. If a power failure occurs while sending a document from memory, the fax or document will be resent
immediately upon recovery.
The notice above only applies when the machine is connected to the Public Telephone Network. Please check
the specification of PBX, if it is connected to it.
Problem
Send a fax.
Receive a fax.
Send a fax.
Memory content.
Data pre-programmed
or preset on your
machine.
• You are talking to a
remote party.
• Make phone calls.
Receiving phone
calls.
Condition
• The fax transmission is aborted. Resend
when power recovers.
• You cannot send a fax.
• The fax reception is aborted. Ask the remote
party to resend when power recovers.
• You cannot receive a fax.
The fax transmission is start again when
power recovers, if there is transmission data in
memory.
Transmission and transmission data stored in
memory is preserved intact.
Data pre-programmed or preset in the address
book and on program dialling, Function
Parameters are preserved through the power
failure.
Please confirm the specification of your
external telephone.
205