Panasonic Workio DP-C262 Facsimile Manual page 19

Use Group Dialling
For transmission to multiple destinations using
group dialling, follow the steps below:
The group dialling button must be pre-
programmed. Refer to Setting for Group Dialling.
(See page 173).
1
Follow the step 1 and 2 on page 14.
2
Select "Program/Group".
3
Select the button for the desired
destination group.
To cancel the choice, select the same
destination again.
4
Press the Start key.
The original(s) are stored into memory with
a file number. Then starts dialing the
telephone number.
19