Panasonic Workio DP-C262 Facsimile Manual page 166

7
Enter a key name, and then select
"OK".
Key names are used to select destinations
on the touch-panel display.
For using the onscreen keyboard, refer to
Before Starting in the Operating
Instructions (For Function Parameters) on
the provided CD-ROM.
8
Select "IFax", and then select "OK".
If you wish to use it in the Email Address
Book of Scan/Email mode and Fax mode
both, select "PC".
9
Select whether to add the station to
"Favourites".
166
10
To enable sub-addressed routing,
enter a sub-address, and then select
"OK".
This screen appears when "152 Sub-Addr
Routing" has been set to "Valid" in Function
Parameters (Fax/Email Settings> Fax
Parameters).
11
To enable routing by the sender's
numeric ID, enter the numeric ID, and
then select "OK".
This screen appears when "153 TSI
Routing" has been set to "Valid" in Function
Parameters (Fax/Email Settings> Fax
Parameters).
Press Reset key to return the machine to
the initial screen of the current active mode.
Select to display the
station in "Favourites".
Select not to display the
station in "Favourites".