Charger
Answer
User Name
Changing
the Language
Coverage
Warning
Silent Charging
Normal
Message
Display
Message
Memory
Overwrite
34
Charger
Answer
When the function is enabled, you can answer incoming
calls when the handset is placed in the charger e. g. by lifting
it off the charger. The "
ended and the handset goes on hook by placing it on the
charger again.
User Name
OK
This function can be used to store the name of the telephone
user. The user name consists of maximum 16 characters.
The name is shown on the idle display. Further information
concerning the input of characters can be found at "Entering
characters / names".
≤/≥
OK
Language
Sets the desired display language. It is possible to select from
10 different languages.
Coverage Warni.
√
If activated "
" an acoustic warning signal is given if there is a
danger of losing the radio link.
Silent Charging
√
If activated "
" the handset does not setup and receive any
calls (and messages) whilst it is placed in the charger. The
first display line shows "Silent Charging" when placed into the
charger. Calls are signalled again once it is taken out of the
charger.
Message
Options
You can determine whether normal messages* received are
immediately displayed "
Message
Options
The message* memory can contain a maximum of 10 messa-
ges. You can select whether each additional new message
deletes the oldest message "
is not stored.
* Applicable only if this function is supported by your telephone system.
OK
" is shown when activated. The call is
√
Z
OK
Name
English
OK
OK
≤/≥
OK
Display
√
", or should only be stored.
≤/≥
OK
Overwrite
√
" or whether the new message
OK
OK
OK