Table of Contents
Advertisement
1.5
About Partial File Restore
XenData6 Workstation can restore individual files but cannot restore just a portion of a file. The operation of
restoring only a portion of a file is known as partial file restore and is functionality which is supported by
XenData6 Server. XenData6 Workstation can be used to archive files to LTO tape cartridges which, at a
later time, can be used in a system running XenData6 Server. To support partial file restores when the
tape cartridges are moved to a system running XenData6 Server, the tapes must be formatted using a
Volume Set that has file fragmentation enabled. This is described further in
About Volume Sets (2.1)
1.6
About File Search
This version of XenData6 Workstation does not support use of the Windows Explorer search function to
search for files stored on LTO tape. Please use the
1.7
How to Obtain Software Version
To determine the version of XenData6 Workstation, follow the steps described below.
Right click on 'LTO Drives' in the left navigation pane of Windows Explorer.
Select 'Properties'.
Select the 'General' tab.
The version will be displayed.
1.8
Language Support
This version of XenData6 Workstation is available only in English.
14
and
How to Configure a New Volume Set
(2.6).
File Search Report
(6.5).
About File Fragmentation
(2.4),
Advertisement
Table of Contents
