Software Licensing; About Licensing; How To License - XenData Limited XenData6 User Manual

1.3

Software Licensing

1.3.1 About Licensing

XenData6 Workstation is licensed under the terms of the End-User License Agreement (EULA) which
must be accepted when the software is installed. You may only use the XenData6 Workstation
software to access, read data from or write data to specific tape drives which have been assigned to
an authentic and valid license.
Under the terms of the EULA, if you have purchased one XenData6 Workstation license for use with
one tape drive, you will assign a specific tape drive to that license. Then, you may install the
XenData6 Workstation software on multiple computers and use the specific assigned tape drive on
any of those computers.

1.3.2 How to License

You will need a XenData Activation Code to be able to use XenData6 Workstation software. The
software is activated by using the XenData License Administration Utility which is displayed during
installation. It may also be launched after software installation as follows.
 Click 'Start', then 'All Programs', then 'XenData'.
 Click 'License Administration'.
10