Interchanging Tapes With Other Systems - XenData Limited XenData6 User Manual

If Internet access is available for the computer being licensed, enter the Activation Code, click on
'Apply' and then 'OK' to activate.
If Internet access is not available for the computer being licensed but is available on another
machine, perform the following steps to activate the software.
 Enter the Activation Code.
Select the 'Generate request for license' option and click Apply.

 The License Administration program prompts you for a file name. Choose a convenient name for
the file and click Save.
 Transfer the file that you have just saved to a different machine that has Internet access.
 Open the file in your Web browser by double clicking on it.
Right-click on the link in the file you have just opened and select 'Save target as...' and select a

location to save your license file.
 Copy the saved license file back to the workstation that is being licensed.
In the license administration utility, select the 'Import file' option and click Apply.

 Browse to the saved XML license file and open it.
1.4

Interchanging Tapes with Other Systems

Tape cartridges may be exchanged between XenData6 Workstation systems and other XenData systems:
 Transferring from one XenData6 Workstation system to another XenData6 Workstation system
When a finalized tape is moved to another XenData6 Workstation system for the first time, the tape
catalog is automatically read by the other system and the tape catalog data is automatically stored on
the c: drive. With a finalized tape the contents become automatically available for restore in the other
system. However, if the tape has not been finalized, the tape catalog data must be built by scanning the
tape. This is performed by using the
12
Build Catalog (5.2) operation.