Table of Contents
Advertisement
Operating Your Camera
3. Press SET button.
Camera ID
POS CLR RESET END
4. You can enter up to 16 characters.
Move the cursor to character-enter location by using the LEFT or
RIGHT button.
Select the desired character by using UP or DOWN button.
•The factory defualt characters are A, B, ···, a, b, ···, ., -, ··· 0, 1···, 8, 9
Camera ID
POS CLR RESET END
Press the SET button to confirm the blinking character. The first
character is saved and the cursor in the bottom of the screen moves to
the next position.
,
Repeats steps
and
until you create the full name you want.
Notes
• If you make a mistake while entering name
Move the cursor to 'Clr', press 'SET' button.
After erasing the character from right to left, correct the character again.
24
COLOR CCD CAMERA
User's Manual
5. Select the position at which the camera ID will be located on the screen.
Move the cursor to 'Pos' and press SET button.
Camera ID
POS CLR RESET END
The camera ID is displayed on the bottom-left of the monitor screen.
(Default position)
FRONT DOOR
Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
FRONT DOOR
6. When completed, move the cursor to 'End' and press SET button.
COLOR CCD CAMERA
25
User's Manual
Advertisement
Table of Contents
