Menu Configuration; Menu Setup - Samsung SID-47 User Manual

Connection
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24(0.22mm 2 ) #22(0.33mm
Resistance (Ω/m) 0.078
Voltage Drop (V/m) 0.028
• As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
*Standard voltage for camera operation : AC 24V ±10% / DC 12V ±10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Notes
• Be sure to connect power only after all the installation is complete.
• Note that AC / DC adaptor is not supplied with camera.
• Ground should be connected to the GND terminal.
Operating Your Camera
Menu Configration
Setup Menu
LENS SHADE
●ON
●SHUTTER
EXPOSURE
●RETURN
●ATW
WHITE BALANCE
●OUTDOOR
BACKLIGHT ●BLC
SSNR ●ON
DAY/NIGHT
●COLOR
IMAGE ADJUSTMENT
●V-REV
(IMAGE ADJ.) ●SHARPNESS
●CAMTITLE...
SPECIAL
●PRIVACY...
●RESET
EXIT
14
COLOR DOME CAMERA
2 ) #20(0.52mm 2 ) #18(0.83mm 2 )
0.050 0.030 0.018
0.018 0.011 0.006
●OFF
●AGC ●SENS-UP
●MANUAL ●AWC→SET
●INDOOR
●HLC ●OFF
●OFF
●B/W ●AUTO
●H-REV ●D-ZOOM
●RETURN
●MOTION DET
●SYNC
●DIS... ●LANGUAGE
●RETURN
User's Manual

Menu Setup

Use the Function Setup switch beside of the lens.
Function Setup switch
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
Select the function by 1.LENS SHADE
moving up or down direction
2.EXPOSURE
of function setup switch.
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
Notes
• A n item with the icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
• A n item with the - - - icon is unavailable due to function settings.
COLOR DOME CAMERA
ON
Change the status by
moving right or left
direction of function
ATW
setup switch.
OFF
ON
COLOR
15
User's Manual