White Balance; Backlight; Ssnr - Samsung SID-47 User Manual

Operating Your Camera
White Balance (White Bal.)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal.' by using the Function
Setup switch so that the arrow indicates 'White Bal.'.
2. Select a desired mode using the Function Setup switch.
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL

4.BACKLIGHT

※ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,800°K and 10,500°K.
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
OUTDOOR : Select this when the color temperature is between 1,800°K and 10,500°K.
(sodium light inclusion)
AWC→SET : To find the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press
the Function Setup switch. If the environment changes, readjust it.
MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using the
ATW or AWC mode. After that switch to
MANUAL mode, fine-tune the White Balance
and then press the Function Setup switch.
Notes
• W hite Balance may not work properly under the following conditions. In this case select the AWC
mode.
W hen the color temperature of environment surrounding the subject is out of the control range
1
(e.g. clear sky, or sunset)
2
When the ambient illumination of the subject is dim.
I f the camera is directed towards a fluorescent light or is installed in a place where illumination changes
3
dramatically, the White Balance operation may become unstable.
18
COLOR DOME CAMERA
ON
ATW
OFF
User's Manual
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates BACKLIGHT .
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT

5.SSNR

2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
 BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
ON

HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible to
view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the screen,
remove the high light to see license plates clearly.
COLOR DOME CAMERA
ON
ATW
OFF
ON
OFF
19
User's Manual