Mitsubishi Electric XD206U User Manual page 17

3 FEATURE
MENU POSITION ...................................... Use to select the position of the menu on the screen,
CINEMA MODE ......................................... When AUTO is selected, the film mode will be automati-
ANAMORPHIC........................................... Select ON when playing DVD discs containing data of
PASSWORD................................................ Use to change the mode of the password lock or to
LANGUAGE ............................................... Use to select the language used in the menu. (ENGLISH / DEUTSCH /
RESET ALL................................................ Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480I, 576I signal is being displayed.
4 SIGNAL
HORIZ. POSITION..................................... Use to adjust the horizontal position of the image.
VERT. POSITION ....................................... Use to adjust the vertical position of the image.
FINE SYNC ................................................ Use to synchronize the projector with the PC input signal
TRACKING................................................. Use to eliminate image noise such as wide stripes.
COMPUTER INPUT .................................. The projector adjusts its settings automatically when
SET UP ...................................................... When OFF is selected, the black area becomes make lighter. When 7.5% is selected, the black area
Important:
• You can set the IMAGE, and SIGNAL menus only when the signal is supplied.
(upper left) or (lower right).
cally activated when a film source signal is inputted.
When OFF is selected, the film mode will not be acti-
vated.
widescreen images. This function is not available for
HDTV.
enable or cancel the password lock. See page 21 for
details.
ESPAÑOL / PORTUGUÊS / ITALIANO /
or YCbCr/YPbPr so that the image is not blurred or not
jittered.
connected to a DVD player equipped with a component
video output (Y, Cb, Cr). When the projector is connected
with a device having an RGB terminal, choose RGB
manually.
becomes thicker.
opt.
FEATURE
MENU POSITION
CINEMA MODE
ANAMORPHIC
PASSWORD MENU ACCESS
A
LANGUAGE
Ë
RESET ALL
/
/ / ).
opt.
SIGNAL
HORIZ. POSITION
VERT. POSITION
FINE SYNC.
TRACKING
COMPUTER INPUT
R G B
R G B
SET UP
XGA60
AUTO
OFF
ENGLISH
OK
/ FRANÇAIS /
XGA60
0
0
0
0
RGB
OFF
EN-17