Invacare 9800A Installation, Assembly And Operating Instructions

INVACARE 9800A BOOM RETRO-FIT
KIT NO.1060539
Installation, Assembly and Operating Instructions
SAFETY SUMMARY
WARNING/CAUTION notices apply to hazards and
unsafe practices which could result in personal
injury and/or property damage.
WARNING
Check all parts for shipping damages before using.
In case of damage, DO NOT use the equipment.
Contact the Dealer/Carrier for further instructions.
DO NOT operate this equipment without first
reading and understanding this instruction sheet. If
you are unable to understand the warnings and
instructions, contact a healthcare professional
(Doctor-Therapist) before attempting to use this
equipment - otherwise injury or damage may result.
After making adjustments, always make sure that
all parts are properly tightened BEFORE using this
patient lift.
DISASSEMBLY OF THE EXISTING SWIVEL
BAR, PUMP AND BOOM ASSEMBLIES
Swivel Bar Removal (FIGURE 1)
1. Remove the swivel bar from the eye at the end
of the boom.
FIGURE 1 - SWIVEL BAR REMOVAL
Pump Removal (FIGURE 2)
1. Remove the nut and bolt that secure the pump
to the boom assembly.
Nut
Boom
FIGURE 2 - PUMP- BOOM DISCONNECT
Boom Removal (FIGURE 3)
1. Remove the bolt and locknut that secures the
existing boom to the TOP of the mast assembly.
FIGURE 3 - BOOM REMOVAL
1
Bolt
NOTE: Not necessary
to disconnect.