White 1550 Instructions Manual page 14

5
REMOVING AND ATTACHING THE PRESSER FOOT
To Remove:
1. Turn the hand wheel towards you until
the needle is at its highest position. Raise
the presser foot by lifting the presser foot
lifter.
2 By lifting the le'.'er on the back of the foot
holder, the presser foot will drop off.
Note: *Do not force the presser foot to
remove
it.
To Attach:
1. Place the presser foot so that the pin on
the foot lies just under the groove of the
foot holder. Lower the foot holder.
2. When the presser foot lifter is raised
you'll find the presser foot is locked in
place.
10