Recording The Current Channel You Are Watching - Samsung DVD-VR325DVD-VR325 Instruction Manual

Concerning Copy Control Signals
TV broadcasts that contain copy control signals may
have one of the following three signal types, Copy-Free,
Copy-Once and Copy-Never. If you want to record a
copy-once type program, use DVD-RW with CPRM in
VR Mode and DVD-RAM.
Copy-Free
DVD-RW(Ver.1.1) O
DVD-RW(Ver.1.1)
with CPRM
VR mode O
V mode O
DVD-R O
DVD-RAM(Ver.2.0) O
Once "Copy Once" has been recorded, additional
recording cannot be performed.
This * marked parts are compatible with CPRM.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media
on which it is recorded. It is supported by some DVD
recorders, but not by many DVD players. Each blank
recordable DVD has a unique 64-bit media ID etched in
the BCA. When protected content is recorded onto the
disc, it can be encrypted with a 56-bit C2 (Cryptomeria)
cipher derived from the media ID.
During playback, the ID is read from the BCA and used
to generate a key to decrypt the contents of the disc.
If the contents of the disc are copied to other media, the
ID will be absent or wrong and the data will not be
decryptable.
Recording the current
channel you are watching
1. Check the antenna cable is connected.
2. Check the remaining time on the disc.
DVD-RAM/DVD-RW discs should be formatted in
advance before beginning recording. Most new discs are
sold unformatted. Make sure to format your unformatted
discs before recording.
Press the OPEN/CLOSE button and place a
1
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc
2
tray.
Wait until LOAD disappears from the front panel
display.
Copy-Once Copy-Never
- -
O* -
-
- -
O* -
3 Press the CH/TRK ( / ) buttons or number
buttons to select the channel you want to record.
4 Press the REC SPEED button repeatedly, to select
the recording speed (quality).
• XP (High, approx. 1 hour) ➝ SP (Standard,
approx. 2 hours) ➝ LP (Low, approx. 4 hours)
➝ EP (Extended Play, approx. 6 hours/8hours)
RW VR
Recordable Time 02:08
5 Press the REC button.
• " " is displayed on the screen and recording
begins.
6
Press the STOP button to stop or finish a recording
in progress.
• The message "Updating the information of disc.
Please wait for a moment" is displayed.
❚
Pausing / Resuming
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the CH/TRK
( / ) buttons while recording pauses.
You can not change the recording mode and
the channel while recording.
Note
Recording will stop automatically if there is no
free space left for recording.
Up to 99 titles can be recorded onto a disc.
If the power interrupted due to power failure
or other reasons, the title being recorded will
not be saved onto the disc.
Recording will stop automatically if a copy
protected image is selected.
Do not use DVD-R authoring discs with this
unit.
XP CH 11
English - 55