Method 3: Connecting To An Av Amplifier With A; Step 5 : Connecting Hdmi/Dvi To A Tv; Method 1 : Connecting To A Tv With Hdmi Jack; Method 2 : Connecting To A Tv With Dvi Jack - Samsung DVD-VR325DVD-VR325 Instruction Manual

Step 5 : Connecting
HDMI/DVI to a TV
If your TV has a HDMI/DVI input, connect HDMI/DVI
cable to a TV. You will enjoy the best quality images and
sounds.

• Method 1 : Connecting to a TV with HDMI Jack

• Method 2 : Connecting to a TV with DVI Jack

❚
Method 1 : Connecting to a TV with
HDMI Jack
• Using the HDMI-HDMI cable connect the HDMI OUT
terminal on the rear of the DVD Recorder & VCR to the
HDMI IN terminal of your TV.
• Press the input selector on your TV remote control until
the HDMI signal from the DVD Recorder & VCR
appears on your TV screen.
❚
Method 2 : Connecting to a TV with DVI Jack
• Using the HDMI-DVI cable (not included), connect the
HDMI OUT terminal on the rear of the DVD Recorder &
VCR to the DVI IN terminal of your TV.
• Using the audio cables, connect the AUDIO (red and
white) OUT terminals on the rear of the DVD Recorder
& VCR to the AUDIO (red and white) IN terminals of
your TV. Turn on the DVD player and TV.
• Press the input selector on your TV remote control until
the DVI signal from the DVD Recorder & VCR appears
on your TV screen.
To watch HDMI/DVI output, set the digital
audio output to PCM. See page 29.
CAUTION
To change HDMI output resolution, see page
30, 31.
Note
HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital trans-
mission of video and audio data with just a sin-
gle connector.
Using HDMI, the DVD Recorder & VCR trans-
mits a digital video and audio signal and dis-
plays a vivid picture on a TV having an HDMI
input jack.
HDMI connection description
HDMI connector - Both uncompressed video
data and digital audio data (LPCM or Bit
Stream data).
- Though the player uses a HDMI cable, the
player outputs only a pure digital signal to
the TV.
- If TV does not support HDCP (High-band-
width Digital content protection), snow noise
appears on the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio sig-
nal. However, when playing a DVD, the data
transmitted to a TV is digital. Therefore either a
digital-to-analog converter (in the DVD
Recorder & VCR) or an analog-to-digital con-
verter (in the TV) is required. During this con-
version, the picture quality is degraded due to
noise and signal loss. DVI technology is superi-
or because it requires no D/A conversion and is
a pure digital signal from the player to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting DVD con-
tent outputted via DVI from being copied. It pro-
vides a secure digital link between a video
source (PC, DVD. etc) and a display device
(TV, projector . etc). Content is encrypted at the
source device to prevent unauthorized copies
from being made.
English - 19