Watching; Dvd-R; Recording The Current Programme You Are Watching - Samsung DVD-VR320 Instruction Manual

Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have
one of the following three signal types, Copy-Free, Copy-
Once and Copy-Never. If you want to record a copy-once
type programme, use DVD-RW with CPRM in VR Mode and
DVD-RAM.
Copy-Free
DVD-RW (Ver.1.1) O
DVD-RW (Ver.1.1)
with CPRM
VR mode O
V mode O

DVD-R

O
DVD-RAM (Ver.2.0) O
Once Copy Once has been recorded, additional record-
ing cannot be performed.
This * marked parts are compatible with CPRM.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the
media on which it is recorded. It is supported by some
DVD recorders, but not by many DVD players.
Each blank recordable DVD has a unique 64-bit media
ID etched in the BCA. When protected content is
recorded onto the disc, it can be encrypted with a 56-
bit C2 (Cryptomeria) cipher derived from the media ID.
During playback, the ID is read from the BCA and
used to generate a key to decrypt the contents of the
disc.
If the contents of the disc are copied to other media,
the ID will be absent or wrong and the data will not be
decryptable.
Recording the current
Programme you are watching
1. Check the antenna cable is connected.
2. Check the remaining time on the disc.
DVD-RAM/-RW discs should be formatted in advance
before beginning recording. Most new discs are sold
unformatted. Make sure to format your unformatted
discs before recording.
Press the OPEN/CLOSE button and place a recordable
1
disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
2
Wait until LOAD disappears from the front panel display.
Copy-Once Copy-Never
- -
O* -
-
- -
O* -
3 Press the PROG/TRK (
buttons to select the station you want to record.
Press the REC SPEED button repeatedly, to select the
4
recording speed (quality).
• XP (High, approx. 1 hour)
approx. 2 hours)
EP (Extended Play, approx. 6hours/8hours)
-RW
XP Recordable Time 02:08
Press the REC button.
5
• " " is displayed on the screen and recording
begins.
6
Press the STOP button to stop or finish a recording
in progress.
• The message "Updating the information of disc.
Please wait for a moment" is displayed.
Pausing / Resuming
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
PROG/TRK ( / ) buttons while recording
pauses.
You can not change the recording mode and
the programme while recording.
Note
Recording will stop automatically if there is
no free space left for recording.
Up to 99 titles can be recorded onto a disc.
If the power interrupted due to power failure
or other reasons, the title being recorded will
not be saved onto the disc.
Recording will stop automatically if a copy
protected image is selected.
Do not use DVD-R authoring discs with this
unit.
) buttons or number
/
SP (Standard,
LP (Low, approx. 4 hours)
English - 57