How To Use The Dvd Recorder & Vcr - Samsung DVD-VR325DVD-VR325 Instruction Manual

How to use the DVD
Recorder & VCR
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc. If you
want to save a recording without any changes,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts for-
matting when an unused disc is inserted. This is
required for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
images and create a playlist in a specific sequence
according to your requirements.
Using a DVD-RW
This type of disc can be formatted in either DVD-
Video format (V mode) or DVD-Video Recording for-
mat (VR mode). For an unused disc, a message that
asks whether to format in VR Mode or not is dis-
played. You can play a V mode disc on various DVD
components. A VR mode disc allows more varied
editing.
Using a DVD-R
This type of disc can be formatted in DVD Video for-
mat. After formatting is complete, you can record on
the disc. You can play this type of disc on various
DVD components only when they have been final-
ized.
■
You can only use either the VR or V mode
on a DVD-RW, but not both at the same
Note
time.
■
You can change the DVD-RW format to
another format by reinitializing.
It should be noted that the disc's data will
be lost when changing formats.
Step 3
Recording
There are two different recording methods: Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once, Daily or Weekly.
Recording mode : XP (high quality mode), SP (stan-
dard quality mode), LP (long recording mode), and
EP (extended mode).
Step 4
Playing
You can select the title you want to play in a dis-
played menu and then immediately start playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two
points where you start and stop recording. Chapters
will be created automatically when you finalize
recording on DVD-RW/-R discs in V mode. The
chapter's length (interval between chapters) varies
according to the recording mode.
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR
mode)
With this recorder, you can create a new playlist on
the same disc and edit it without
original recording.
changing the
English - 9