Vivotek VS2101 User Manual page 78

thu <not required>
fri <not required>
sat <not required>
sbegin <hh:mm:ss>
send <hh:mm:ss>
inv <not required>
enfile <not required>
emode <not required>
showalert <not required>
mdmode <not required>
dihigh <not required>
dilow <not required>
dirise <not required>
difall <not required>
delay <integer>
ioalarm <not required>
mdalarm <not required>
ioupload <not required>
mdupload <not required>
resetdo <not required>
smode <not required>
sinter <integer>
smethod mail
ftp
suffix <not required>
set Thursday in weekly schedule
set Friday in weekly schedule
set Saturday in weekly schedule
time to start in weekly schedule
time to stop in weekly schedule
set inverse mode in weekly schedule
enable script file
event operation
show alert in image
Enable motion detection
Enable DI is high
Enable DI is low
Enable DI is rising
Enable DI is falling
delay time of DO after event
trigger DO when DI condition matched
trigger DO when motion detected
upload snapshot when DI condition
matched
upload snapshot when motion detected
Clear the DO status
sequential mode application
tenth seconds interval for sequential mode
upload snapshots by email
upload snapshots by FTP
FTP file with date and time suffix
- 76 -