Samsung DVD-R120 Quick Setup Manual page 2

Antenna + VCR/Satellite receiver + DVD Recorder + TV
Wall
TV † †
OR
OR
OR
... ... AV amplifier (receiver) ... ... external device
(VCR/satellite receiver)
❇ We recommend using one of the discs in the table
as they have been confirmed to be compatible with
this unit. Other discs may not perform correctly.
Media Disc
TDK
Beall
DVD-R That's
Maxell
Panasonic
TDK
Maxell
DVD-RW Optodisc
Radius
Verbatim
Maxell
Fujifilm
DVD-RAM
TDK
Panasonic
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
To RF IN
... ... DVD Recorder
SPEED
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
3x
3x
2x
3x
2
Connect the cable from the antenna/cable TV outlet to DVD
Recorder.
Use the Video/Audio Cable to connect LINE AUDIO
OUT(R/L)/VIDEO OUT jacks on the DVD Recorder to the Audio &
Video jacks on the TV.
• For better picture quality, if your TV has an S-Video jack, you can
use S-Video cable instead of the yellow video connector on the
Video/Audio cable.
• For the best picture quality, if your TV has Component video
jacks, you can use component cables instead of the yellow video
connector on the Video/Audio cable. If the TV connected supports
Progressive Scan, press the P.SCAN button on the front of the
DVD Recorder to enjoy higher quality video.
Use the Video/Audio Cable to connect the LINE OUT jacks on the
STB or VCR to the AUDIO/VIDEO LINE 1 IN jacks on the DVD
Recorder.
• For better picture quality, if your STB or VCR has an S-Video jack,
you can use S-Video cable instead of the yellow video jack on the
Video/Audio cable.
If you have an AV amplifier
Connect either audio cables from the LINE AUDIO OUT jacks on the
DVD Recorder to the LINE IN jacks on your AV amplifier, or a digital
cable from the DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack on
the DVD Recorder to the DIGITAL AUDIO IN jack on your AV
amplifier.
The Antenna connection does not pass audio/video signals. To watch
a DVD on your TV, you must connect audio/video cables.