Section 2-Parts And Installation; Parts Information; About Installation; Preparing The Work Area - Invacare 3600 Owner's Operator And Maintenance Manual

SECTION 2—PARTS AND INSTALLATION
SECTION 2—PARTS AND
INSTALLATION

Parts Information

For parts information, please contact ICCI Technical Service at (800) 668‐2337.

About Installation

WARNING
Access for servicing the tub MUST be provided. Install the tub in a location that will
permit access to the service panels, plumbing and electrical hook-ups.
CAUTION
DO NOT lift the tub by the plumbing.
DO NOT remove or relocate the pump. Modifications to the pump location may
cause the system to malfunction and will void the warranty.
The tubs are free‐standing side‐entry bathing and hydromassage tubs which are secured
to the floor.

Preparing the Work Area

NOTE: For this procedure, refer to FIGURE 2.1 on page 15.
1. Determine location for the tub installation.
NOTE: Follow recommended floor plan shown in FIGURE 2.1 on page 15 when installing the tub.
2. Carefully remove the tub from carton.
3. Remove tub from shipping pallet by removing screws from leg mounting pads (Detail
"A").
4. Remove the four screws securing the service access panel (FIGURE 2.1).
14
Side Entry Whirlpool Tub Part No 1118387