Ringer Off - VTech DS6751 User Manual

Appendix
Screen messages
No line
No message
Not available
Number repeated
Out of range or
no pwr at base
Phone
Put in charger
Quiet mode off
Quiet mode on
Rec mem full
Registering...
Ringer muted

Ringer off

Saved
Speaker
To screen call
press [SELECT]
To register HS...
...see manual
Transferred
Unable to call
XX missed calls
XX new messages
** Paging **
There is no telephone line connected.
There are no message in the answering system.
Another device is already in the directory, caller ID log, or accessing the
answering system; the cell line is not ready to use.
The telephone number you try to save is already stored in the directory.
The telephone base has lost power, or the handset is out of range.
The handset is on a call.
The battery is very low. Put the handset in the telephone base or charger
for recharging.
The quiet mode is turned off.
The quiet mode is turned on.
The answering system has no recording time left.
The handset registration is in progress.
The ringer is muted temporarily when the phone is ringing.
The ringer is turned off.
Your selection has been saved.
The speakerphone is in use.
The system is recording a message. Press SELECT to screen a call on
a handset.
Screen display on a non-registered handset.
You have transferred an outside call to another device.
The handset is out of range while on a call.
Failed phone call (the telephone line is in use).
Failed intercom call (there are already two handsets being used).
There are new calls in the caller ID log.
There are new messages in the answering system.
All system handsets are being paged.
75