Samsung ML-1440 User Manual page 45

Control Panel Buttons
3.2 U C
SING THE ONTROL
Print demo page
Demo
Press and hold Demo for about 2 seconds until the
control panel lights blink slowly to print a demo page.
The printer must be in the ready mode. For further
information, see
Start manual feeding
When you select Manual Feed for Paper Source
from your software application, you should press
Demo each time you feed a sheet of paper manually.
For further information, see
Cleaning the inside of the printer
Press and hold Demo for about 10 seconds until the
control panel lights remain illuminated to automatically
clean the inside of the printer. After cleaning the printer,
one cleaning sheet prints. For further information,
see page
Toner Save Toner Save
Press Toner Save to turn the toner save mode on or
(on)
off. The printer must be in the ready mode.
Toner Save
• If the button backlight is on, toner save mode
activates and the printer uses less toner to print a
document.
(off)
• If the button backlight is off, toner save mode is
disabled and you will print in normal quality.
For further information on the Toner Save mode, see
page
P
ANEL
page 2.9.
6.5.
5.6.
page 4.7.