Samsung ML-1440 User Manual page 123

Solving Print Quality Problems
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Problem
Background scatter
AaBbCc
A
AaBbCc
AaBbCc
AaBbCc
AaBbCc
aBbCc
aBbCc
aBbCc
aBbCc
Misformed characters
aBbCc
Page skew
7.18
P S
ROBLEM
Background scatter results from bits of toner distributed on
the printed page.
• The paper may be too damp. Try printing with a different
• If background scatter occurs on an envelope, change your
• If background scatter covers the entire surface of a printed
• If characters are improperly formed, producing hollow
• If characters are improperly formed, producing a wavy
• Check the paper type and quality. See "Paper
• Make sure that the paper or other media is loaded
OLVING
batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture from the air.
printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams
can cause this problem.
page, adjust the print resolution through your software
AaBbCc
application or the printer properties.
AaBbCc
AaBbCc
AaBbCc
AaBbCc
images, the paper stock may be too slick. Try a different
paper. See "Paper Specifications" on
effect, the scanner unit may need service. Check to see if
it also occurs on a demo page by pressing the Demo
button on the control panel when the printer is ready. If
you need service, contact a service representative.
Specifications" on page
correctly and the guides are not too tight or too loose
against the paper stack.
Solution
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
page A.2.
A.2.