Samsung ML-1440 User Manual page 21

Load Paper
4
Make sure that the stack goes under the
metal retaining clip
tabs on the end guides. Pay attention to
the paper limit mark on the left inside
wall of the tray. Paper overloading may
cause paper jams.
Note: If you want to change the paper
size in tray, refer to "To Change Paper
Size in Tray" below.
5
Slide the tray back into the printer.
To Change Paper Size in Tray
1
Adjust the tray for different paper sizes
by sliding the appropriate paper length
guide to the desired position.
2.6
S U Y P
ETTING P OUR RINTER
and the plastic
A
A