Trycom Technology TRP-C31M User Manual page 7

4-4. DB9 Pin Configuration
Pin RS-232 RS-422
1
2
3
4
5
6
7
8
9
5.Serial Port Operational Modes
Using the TRP-C3XM Manager software, the serial port of TRP-C31M can be set to Console Mode,
Default Mode or Upgrade Mode. The serial port can be configured for RS-232, RS-422 or RS-485
operation. The TRP-C31M also can be set to Console Mode by placing all the DIP switches into the
ON position.
5-1. Console Mode
The console mode allows TRP-C31M access to the setup menu. This is the way to reconfigure the
default settings for the application. A serial connection is made between a PC COM port and the
TRP-C31M serial port by using a null modem cable. In console mode, the serial port defaults to an
RS-232 interface.
The serial port default settings are,
Server name:
Serial number:
Password:
DHCP:
IP address:
Netmask:
Gateway :
MAC address:
Version & Date:
Serial port
Baud rate:
Data/Stop bits:
Parity:
Flow control:
Serial port mode:
DCD RXD (-)
RXD RXD (+)
TXD TXD (+) D (+)
DTR TXD (-)
GND GND
DSR CTS (-)
RTS CTS (+)
CTS RTS (+)
RI RTS (-)
TRP-C31M
Fixed
Blank
Disable
192.168.1.1
255.255.255.0
192.168.1.254
Fixed
Current firmware version number and date
9600
8-1
None
None
RS232
RS-485
D (-)
GND