Fan Speed Setting - Hitachi RAS-R10C-1 Instruction Manual

Split type
Table of Contents

Advertisement

SUPER COOLING ONE TOUCH
I Use this mode whenever you want more cooling immediately.
SILENT
SILENT
SUPER
SILENT
SILENT
SUPER
SILENT
SILENT
SUPER
Fan speed can not operated with "HIHI" when you press
abnormal. About 3 minutes later fan speed will be changed to "HIHI" automatically itself.
1. If you press
SUPER
2. If you press
SUPER
or "Dehumidify" and the room temperature is almost reached to the setting temperature, compressor
will stop.)
1
Press
G
Operation start with a signal received sound "beep" and
blink.
G
Initial setting temperature changed to 16°C and fan speed is changed
to maximum speed (Indicated by
G
Unit continues to operate in this mode for 1 hr. After that fan speed
changed to auto fan mode. The indicator of light and remote do not
change until unit operation is off or mode is changed.
I
If press "SUPER" button again during super operation, unit will re-
operated in this mode again for 1 Hr.
2
Room Temperature Setting
Up
DOWN
3

FAN SPEED SETTING

G
Press
[
[
HIHI
HIGH
I
When operate in this mode, can not use TIMER RESERVATION
mode.
4
STOP "SUPER MODE"
G
Press
G
Press
button within 3 minutes after stop the operation for "Cooling" of "Dehumidify".
button within 3 minutes after compressor stopped. (When operated in "Cooling"
– 9 –
button
SUPER
up when too cool.
unable to down because this setting temperature is
the lowest (16°C).
to change fan speed as the below sequence
[
[
[
[
MED
LOW
to stop this mode and change the mode to other.
to stop this mode and also turn off the unit.
button as the situation below. It is not
SUPER
SUPER
sign).
sign

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rac-r10c-1Ras-r13c-1Rac-r13c-1

Table of Contents