Timer Reservation - Hitachi RAS-R10C-1 Instruction Manual

TIMER RESERVATION

I ON Timer and OFF Timer are available.
OFF Timer Reservation
1
OFF TIME setting
G
Select the OFF TIME by pressing the
Button.
G Setting time will change according to the below sequence
when you press the button.
0.5 hour interval
0 . 5 1 . 0 1 . 5
G The value change quicker if you keep pressing the button.
2
Press the
G
OFF TIMER reserved with a signal received sound "beep".
o
G
The (OFF) Mark starts lighting instead of blinking.
ON Timer Reservation
1
ON TIME setting
G
Select the ON TIMER by pressing the
Button.
G At the beginning of setting, time 6 hours was set.
G
Setting time will change according to the below sequence.
0.5 hour interval
0 . 5 1 . 0 1 . 5
G
The value change quicker if you keep pressing the button.
2
Press the
G
ON TIMER reserved with a signal received sound "beep".
G The (ON) Mark starts lighting instead of blinking.
CANCELLATION of Timer Reservation
1
Press the
G
As the time settings are stored in remote controller
memory, you only have to press the
button in order to use the same setting next time.
If press the " " button, timer operation is reserved.
If press the " " button again, timer operation is cancelled.
1 hour interval
9 . 5 10
(Reserve) button
1 hour interval
9 . 5 10
(Reserve) button
(Cancel) button
– 11 –
I Operation stop at setting time
(OFF)
SILENT
11 12
SUPER
SILENT
SUPER
(ON)
I Operation will start for setting
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).
11 12
SILENT
SUPER
(Reserve)
SILENT
SUPER
SILENT
SILENT
SILENT
SILENT