Automatic Operation - Hitachi RAS-R10C-1 Instruction Manual

AUTOMATIC OPERATION

I The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending
on the initial room temperature. The selected operation mode will not change when the room
temperature varies.
SILENT
SILENT
SUPER
I You can slightly adjust the room temperature.
SILENT
SILENT
SUPER
I CONDITION OF AUTOMATIC OPERATION
The selected mode of operation will not change during the operation even though the room
G
temperature change.
INITIAL ROOM
TEMPERATURE (APPROX.)
Over 27°C
16 ~ 27°C
1
Press the
G
Operation start with a "beep".
STOP Press the
G
The fan speed selector does not work at this operation.
1
Press the
G Temperature setting change by 1°C for each 1 time press.
Up
Down
G
You can raise or lower the temperature setting by a maximum of
3°C.
G The display does not indicate the preset temperature in the Automatic
mode. Device will receive the setting by a "beep".
TEMPERATURE
FUNCTION
COOL
Slightly lower than the
DEHUMIDIFY
room temperature
– 7 –
(START/STOP) button
(START/STOP) button
(ROOM TEMPERATURE) button
SETTING
G When the difference of room
temperature and setting
temperature is large, fan starts
to run at HI speed,
G
After room temperature come
to the preset temperature, the
27°C
cooling operation, which
changes the fan speed and
room temperature to obtain
optimum conditions for natural
healthful cooling, will be
performed.
FAN SPEED
LOW