2. Operation
2.1. Control system
The heat pump is equipped with an automatic control system which manages heating
and domestic hot water production. The control system includes the built-in automation
system, the sensors attached to it, and a control panel. Browsing and changing system
settings is done on the control panel. It is also used for browsing and resetting error
notifications.
A remote control unit (option) can also be used for browsing and changing system
data and error notifications. The remote control unit can also be used as a remote
temperature sensor, providing the control system with room temperature data.
The system settings have been organised into menus, similar to folders on a computer.
In addition, there are various user levels in the system. The visibility of menus or
menu items depends on the user level. To access user levels other than End user or
Commissioning, you need an access code.
2.2. Control panel
Control panel
1
4
Control panel ver. 3
GT02 1408 EN
2
5
6
7
8
Remote controller
(optional extra)
3
GSHP01 ver. 3
7 (24)