Table of Contents
Advertisement
Heating curve can be adjusted using heating curve displacement. Then curve slope
is according to curve control, but set value raises or decreases. + raises setting and –
decreases setting. Adjust curve on operating lines 721: Heating curve displacement
(Heating circuit 1) and 1021: Heating curve displacement (Heating circuit 2). This
method is practically the same as changing the comfort setpoint value.
2.8. Configuring domestic hot water settings
Domestic hot water heating can be turned off and on using tap button at the upper left
corner of the display.
Set domestic hot water comfort setting and reduced setting temperatures as follows.
1. Press the OK button to access the menu system.
A menu list appears on screen.
2. Select Domestic hot water and press the OK button.
A list of available operating lines appears on screen.
3. Select operating line 1610: Nominal setpoint and press the OK button.
4. Set the correct value and press the OK button.
5. Select operating line 1612: Reduced setpoint and press the OK button.
6. Set the correct value and press the OK button.
2.9. Changing heating mode and domestic hot water heating
1. Press the Heating mode button.
A black bar appears on screen under the currently selected heating mode
symbol.
2. Press the Domestic hot water button to set domestic hot water heating on or off.
A black bar appears on screen under the domestic hot water symbol when
domestic hot water heating is on.
2.10. Performing forced charging
When there is a temporary increase in domestic hot water demand, you can force the
heat pump to charge domestic hot water.
Press the domestic hot water button for five seconds or longer. The heat pump begins
to heat domestic hot water to its nominal setting, regardless of the temperature
difference between the current temperature and the nominal setting.
GT02 1408 EN
If you hold the button down for five seconds or longer, forced
charging is activated.
13 (24)
Hide quick links:
Advertisement
Table of Contents
