Table of Contents
Advertisement
Charcoal Filters
In the recirculation mode the charcoal filters
absorb smells and unwanted odours.
The charcoal filters cannot be cleaned, we
recommend they should be replaced
approximately every three months or more often
if the hood is used for more than three hours per
day.
To Remove/Replace the
Charcoal Filters
1.
First remove the metal grease filters.
2.
Rotate the charcoal filter anti-clockwise
(B) and remove.
3.
To replace the charcoal filters, remove
the metal grease filters.
4.
Place the filter over the inlet grille at
either end of the fan housing and rotate
clockwise (A) into position.
This appliance can be a possible fire
hazard if the grease and charcoal filters
are not cleaned and replaced as
recommended.
Changing the Light Bulb
1.
First remove the metal grease filters.
2.
The light bulbs can be reached from
inside the canopy.
3.
Rotate the light bulb anti-clockwise to
unscrew.
4.
To replace the light bulb insert a
replacement into the holder then rotate
the bulb clockwise into position. Ensure
you take care not to overtighten the
bulb.
If the light bulb fails to function check that the
bulb is fully screwed into the holder. If bulb
failure has occurred then it should be replaced
with a 220-240 Volt 40W clear globe shaped
bulb with a small E14 screw thread.
Replacement filters and light bulbs can be
obtained from your local Service Force Centre.
7
Advertisement
Table of Contents
