Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.
Starting the washing programme: 1. Select a washing programme. 2. Press the Start/Cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selection made Start/Cancel you must cancel the washing programme in progress. button Cancel the washing programme in progress: 1.
Before the first use When using separate special When using tablets that integrate (dishwasher) salt, rinse aid and rinse aid, detergent, salt function detergent: and other additives: - set the water softener there is no need to fill up with special salt or rinse aid.
Page 7
Water hardness Number of flashes of the Adjustment of the water “end of programme” light hardness setting in Clarke in °TH in mmol/l manually electronically 64 - 88 91 - 125 9,0 - 12,5 level 10 53 - 63 76 - 90 7,6 - 8,9 level 9 46 - 52...
Page 8
Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must Press and hold the start/cancel button and turn the Release the button. The be switched off programme selector dial clockwise till the first end of programme programme.
Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers Unscrew the cap. Only before filling with Using the funnel salt for the first time, provided, pour in the fill the salt container salt until the container is with water filled with salt.
Filling with rinse aid Open the lid. Fill up with rinse aid. Clean up any rinse aid The maximum level for which overflows. Close filling is indicated by the lid and press until it "max". locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g.
Loading cutlery and dishes The following items are not suitable for use When loading the dishwasher, make sure in the dishwasher: that you: - Remove all left over food and debris. - Cutlery with wooden, horn, china or mother-of-pearl handles - Soften remnants of burnt food in pans - Plastic items that are not heat resistant - Load hollow items such as cups, glasses,...
Load upper basket. For taller items, the cup If plates are to be loaded in the upper Light items (plastic racks can be folded basket: bowls etc.) must be upwards. load them starting from the rear positions; loaded in the upper tilting them slightly forwards and avoiding the basket and arranged so front positions near the door.
Filling with detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. Open the lid. Observe the dosing Fill in the detergent in levels. compartment A. For programmes with When using detergent Close the lid. prewash add an tablets: additional detergent...
Cleaning and care Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. The dishwasher must Clean filters A, B and C Turn the handle about be switched off thoroughly under turn anticlockwise running water.
External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If the temperature is below 0°C. If this is necessary use only neutral detergents. Never unavoidable, empty the machine, close the use abrasive products, scouring pads or appliance door, disconnect the water inlet pipe...
Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions.
Page 17
The wash results are not satisfactory The wrong washing programme has been selected. The dishes are not clean The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arm do not rotate freely due to incorrect arrangement of the load.
Technical data Dimensions Width 60 cm Height 85 cm Depth. 61 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage - Overall power - Fuse the inner edge of the dishwasher’s door. Water supply pressure Minimum 0,05 MPa (0.5 bar) Maximum...
Hints for test institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test programme (see "Consumption aid dispenser have been filled with salt and values").
Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Water connection WARNING! WARNING! The dishwasher must not be connected to Only use, for connection to the water mains, open water appliances or instantaneous water new hose-set;...
CAUTION! Always be sure, that there is no water leakage from hoses and their connections after the installation. Ensure that the hoses are not kinked, crushed or entangled. Electrical connection WARNING! Safety standards require the appliance to be earthed. The manufacturer accepts no liability for failure to observe the above safety precautions.
Fitting under a counter By removing the dishwasher’s worktop, you Be sure that once the appliance has been can install it under a close fitting sink unit or a installed, it is easily accessible for the service pre-existing top. engineer in the event that a repair is required. Unscrew the two screws Push the top backwards Lift top at the front and...
In the event of your appliance requiring Customer Care Department service, or if you wish to purchase spare parts please contact your local Service Force Centre For general enquiries concerning your Zanussi- by telephoning: Electrolux appliance or for further information on Zanussi-Electrolux products please contact...
Guarantee conditions Standard Guarantee Conditions Exclusions This guarantee does not cover: We, Zanussi-Electrolux, undertake that if within 12 months of the date of purchase this Damage or calls resulting from ZANUSSI-ELECTROLUX appliance or any part transportation, improper use or neglect, the...
European guarantee This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications: The appliance guarantee starts from the date...