Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnec- essary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Installation • Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • All packaging must be removed before use. • Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.
Page 5
Start/cancel button Programme selector indicator light End of programme indicator light • Starting the washing programme: 1. Select a washing programme. 2. Press the Start/Cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selection made you must cancel the washing programme in progress.
Washing programmes Programme Heavy soil Intensive 70° Normal soil Normal 65° Light soil Eat-Load-Run 30 min. Normal soil 50° 1) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid – set the water softener – add special (dishwasher) salt When using tablets that integrate rinse aid, detergent, salt function and other additives: there is no need to fill up with special salt or rinse aid.
Press and hold the start/cancel button and turn the programme selector dial clockwise till the first pro- gramme. Keep the button pressed until the programme selector indicator light and the start/cancel indicator light start flashing. Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers.
Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! The salt container will require topping up periodically. Filling with rinse aid Open the lid. IMPORTANT! Immediately start a complete programme. IMPORTANT! Water will overflow from the container as salt is add- The salt cap has a refill indicator window in the centre...
Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Top up the rinse aid indi- cator (B) becomes clear Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing.
Page 12
that water cannot collect in the container or a deep base. – Dishes and items of cutlery must not lie inside one another, or cover each other. – To avoid damage to glasses, they must not touch. – Lay small objects in the cutlery basket. For washing in the dishwasher the following cutlery and dishes are not suitable: •...
Load upper basket. Light For taller items, the cup items (plastic bowls etc.) racks can be folded up- must be loaded in the up- wards. per basket and arranged so they do not move. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper bas- ket to the higher position.
Use of detergent IMPORTANT! Only use detergents suitable for dishwashers. Open the lid. For programmes with When using detergent prewash add an addition- tablets: place detergent al detergent dose in com- tablets in compartment partmentB. Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appli- ance.
Care and cleaning Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results. Clean filters A, B and C thoroughly under running water. Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle...
abrasive products, scouring pads or solvent (acetone, trichloroethylene etc...). Internal cleaning Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.
caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.
Page 18
Fault code and malfunction • The programme does not start Once these checks have been carried out; close the dishwasher s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm.
The dishes are not clean The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Water drops have dries onto glasses and dishes If after all these checks, the problem persists, contact your local Service Force Centre.
Noise level Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var- Programme Programme duration A Intensive 65° 120-130 105-115 B Normal 65° C Eat-Load-Run 30 min.
Upper basket cup racks: position A Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heat- Cutlery basket ers.
Inlet hose Connect the inlet hose to a water tap with an external thread of 3/4 . The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks.
Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.
Guarantee conditions Guarantee/Customer Service Standard guarantee conditions We, Zanussi-Electrolux , undertake that if within 12 months of the date of the purchase this Za- nussi-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty...
address below or visit our website at www.electrolux.co.uk Customer Care Department Electrolux Major Appliances Addington Way Luton Bedfordshire, LU4 9QQ Tel: 08705 727 727 (*) (*) Calls may be recorded for training purposes European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the ap- pliance guarantee or otherwise by law.
Page 26
LU4 9QQ 4, Limnou Str., 54627 Thessaloni- Slavonska avenija 3, 10000 Za- greb Long Mile Road Dublin 12 C.so Lino Zanussi, 26 - 33080 Por- cia (PN) Kr. Barona iela 130/2, LV-1012, Riga Ozo 10A, LT 08200 Vilnius Rue de Bitbourg, 7, L-1273 Hamm H-1142 Budapest XIV, Erzsébet...
Page 27
Türkiye Россия +90 21 22 93 10 25 +7 495 937 7837 Tarlabaşı caddesi no : 35 Taksim İstanbul 129090 Москва, Олимпийский проспект, 16, БЦ "Олимпик"...
Page 28
www.electrolux.com 156996230-00-23032007 Subject to change without notice...