Using Your Phone; Placing A Telephone Call; Receiving A Telephone Call; Redial - Uniden FP105 Operating Manual

Using your phone

USING YOUR PHONE

PLACING A TELEPHONE CALL

1. Remove the handset from the base, or press the speaker button.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the call, place the handset back on the cradle.

REDIAL

If you want to redial the last number dialled, simply pick up the handset or press the
speaker button, then press the redial button. The telephone will automatically redial the
last number dialled.

RECEIVING A TELEPHONE CALL

When the phone rings, pick up the handset from the cradle or press the speaker button
and begin the conversation.

ADJUSTING THE RINGER VOLUME CONTROL

While the phone is ringing, you can adjust the ringer volume of your telephone by moving
the ringer volume switch, located at the rear of the telephone, to the desired off/lo/hi
position.

ADJUSTING THE RINGER TONE CONTROL

While the phone is ringing, you can adjust the ringer tone of your telephone by moving
the ringer tone switch, located at the rear of the telephone, to the desired position.

ADJUSTING THE HANDSET VOLUME CONTROL

While using the telephone, you can adjust the handset volume slider control, located
at the side of the telephone, to the desired position.
14