Front And Rear Panel Connectors - ALLEN & HEATH Xone:K2 User Manual

FRONT AND REAR PANEL CONNECTORS

Headphones Output
1
Stereo 3.5mm mini-jack. Plug in good quality stereo headphones intended for DJ
monitoring. Use closed-ear headphones that provide maximum acoustic isolation
when cueing your sources. We recommend that you use high quality headphones
rated between 30 to 100 ohms impedance.
recommended.
Warning ! To avoid damage to your hearing do not operate the headphones or sound
system at excessively high volume. Continued exposure to high volume sound can cause
frequency selective or wide range hearing loss.
Ensure that the headphone level in your DAW is turned to an appropriately low level
before connecting headphones.
Audio Connectors
1
RCA Phono connectors for connecting to an external device such as a mixer or
amplifier.
X:LINK In Socket
2
RJ45 socket for proprietary connection to another X:LINK enabled Xone device.
X:LINK Out Socket
3
RJ45 socket for proprietary connection to another X:LINK enabled Xone device.
USB Connector
4
Socket for connecting the Xone:K2 to the PC/Mac.
Allen & Heath
1
1 2
10
8 ohm headphones are not
3 4
XONE:K2 User Guide