Samsung VP-D451 Owner's Instruction Book page 79

ENGLISH
IEEE1394 Data Transfer
System Requirements
I
CPU: faster Intel ® Pentium III™ 450MHz compatible.
I
Operating system: Windows ®
I
Main memory: more than 64 MB RAM
I
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable
(VP-D451i/D453i/D454i/D455i only)
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(VP-D453i/D454i/D455i only)
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder
to the DV jack of the other DV device.
I
Make sure that is displayed.
4. Press the Start/Stop button to begin
REC PAUSE mode.
I
PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop
button again.
7. To stop recording, press the
[ Notes ]
I
When using this Camcorder as a recorder, the pictures that appear
on an external monitor may seem distorted, however recorded
pictures will not be affected.
I
Operation is not guaranteed for all the recommended computer
environments mentioned above.
I
While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
98SE, ME, XP, Mac OS (9.1~10.2)
(STOP) button.
IEEE1394
I
CPU Intel ® Pentium III™ 450MHz
I
Windows 98SE ME XP Mac OS 9.1 10.2
®
I
64MB RAM
I
IEEE1394 IEEE1394
DV (
1.
2.
DV
(
USB
3.
AV/ S
DV
I
4.
I
5.
6. Start/Stop /
I
7. STOP
I
I
I
VP-D451i/D453i/D454i/D455i)
PLAYER
TAPE
VP-D453i/D454i/D455i)
DV
DV DV
Start/Stop /
REC PAUSE
PAUSE
DV
Start/Stop
PC
79 79