Ahuja SWX-200P Operation Manual page 11

5.1 home theatre system
PS-500T
Front Left
PS-500T
Surround Left
Connect the Digital Out of DVD player to Digital In
of the AV Receiver using a patch cord with RCA
plugs at both ends.
Connect 5 nos. of Ahuja high fidelity 2-way
speakers PS-500T (at 8 ohm tap) to the AV
receiver (all modern AV receivers have separate
output connections for each of the five satellite
speakers). The output level of the satellite
speakers can be adjusted from the AV receiver.
When using the powered subwoofer SWX-200P in
conjunction with AV amplifiers and receivers with
surround capability, connect the subwoofer pre out
terminal located on the back panel of the AV
receiver to the 200mV input of SWX-200P.
PS-500T
Centre
SWX-200P
Centre Out
Front Left
Surround Left
AV Receiver
DVD Player
11
• Typical Applications....
200mV Input
Subwoofer Preout
Front Right
Surround Right
Digital In
Digital Out
Use a patch cord of suitable length with an RCA
plug at one end and a ¼" phone plug on the other
end (most modern AV receivers have RCA jacks
for input and output connections).
Place the subwoofer preferably between the front
speakers, with the reflecting port preferably not
facing the corners.
Set the crossover frequency of the subwoofer to
80Hz and adjust the volume control to deliver
optimum performance.
PS-500T
Front Right
PS-500T
Surround Right
SWX-200P