Advertisement
®
Powered Subwoofer
100W RMS
SWX-200P
Thank you for purchasing the AHUJA Powered Subwoofer.
Please read this manual thoroughly before making connections and turning on the power. Following
the instructions in this manual will enable you to obtain optimum performance from your new
AHUJA Powered Subwoofer.
Please retain this manual for future reference.
Advertisement
Summary of Contents for Ahuja SWX-200P
- Page 1 100W RMS SWX-200P Thank you for purchasing the AHUJA Powered Subwoofer. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance from your new AHUJA Powered Subwoofer.
-
Page 2: Safety Instructions
Replacing AC Mains Fuse: After disconnecting the AC mains and rectifying the defect in the amplifier, change the fuse with another of the specified rating only. Exposure to Hot Region: Do not touch the Heat Sink while the Powered Subwoofer is in operation. SWX-200P... -
Page 3: Table Of Contents
Block Diagram & Specifications ..........12 SWX-200P... -
Page 4: Features/General Description Of Product
PA system to enjoy powerful bass reproduction. A single SWX-200P working with six to eight satellite speakers forms an ideal Business music system for an area up to 2400 sq. ft. (240 sq. mtrs.) Housed in an elegant PVC coated wooden cabinet. -
Page 5: Rear Panel Controls & Description
AMP 250V) conditions. Connect the provided AC Mains cable in this socket for AC mains operation. The fuse protects the RESET Button amplifier from any excessive current flow. An FAULT LED additional 3A fuse is also provided as an accessory. SWX-200P... -
Page 6: Interconnections
OFF. The 1V sensitivity input jack can be used for The SWX-200P has two unbalanced independent accepting an unbalanced line level signal from a inputs. One accepts signals of 200mV and the other Audio mixing console or the line output of an audio of 1V signals. -
Page 7: Placement / Operation Of Product
Power The SWX-200P is equipped with a Main power switch. In order to function the SWX-200P must be plugged into an active electrical outlet, and the Main power switch must be turned on. -
Page 8: Typical Applications
200mV) to the 200mV input of the subwoofer Recorder 4040-SM using a patch cord with RCA SWX-200P through a 'Y' cord (with 2 nos. RCA plugs at both ends. The CD input sensitivity is Plugs on one end and a ¼" phone plug at the other selected through a CD / Aux switch in 4040-SM. - Page 9 Connect the left and right outputs of the CD player For providing background music on the other floor, to either of the two Aux inputs of Ahuja two zone which may have lesser ceiling height, it is amplifier TZA-2000 using a 'Y' cord (with two RCA recommended to use 12 nos.
- Page 10 100V output terminal of amplifier SSA-350. Connect the Line output of the amplifier SSA-350 to the 1V inputs of the two powered subwoofers SWX-200P, using a 'Y' cord (with ¼" phone plug at one end and two ¼" phone plugs at the other end). SWX-200P...
- Page 11 (most modern AV receivers have RCA jacks for input and output connections). Connect 5 nos. of Ahuja high fidelity 2-way speakers PS-500T (at 8 ohm tap) to the AV Place the subwoofer preferably between the front...
-
Page 12: Block Diagram & Specifications
+18V AC FUSE REGULATOR 220-240V 50Hz +50V POWER POWER -50V Specifications Model SWX-200P Amplifier Power 100W RMS at 0.5% THD 90W RMS at 0.05% THD System Down-Firing Speaker System Speaker Woofer 203 mm (8") SPL (1W/1m) 90dB Frequency Response (-3dB)