Advertisement
• Typical Applications....
High performance music system for large enclosed area
100V Line Output
Microphone
PS-500T
Connect the left and right outputs of the CD player
to the Aux-2 input (200mV) of Ahuja PA amplifier
SSA-350 using a 'Y' cord (with two RCA plugs at
one end and a ¼" phone plug on the other end).
A paging microphone can also be connected to
any one of the mic inputs of SSA-350 to make
announcements.
10 nos. of Ahuja high fidelity 2-way speakers
PS-500T (at 32 watts tap) can be connected to the
100V output terminal of amplifier SSA-350.
Connect the Line output of the amplifier SSA-350
to the 1V inputs of the two powered subwoofers
SWX-200P, using a 'Y' cord (with ¼" phone plug at
one end and two ¼" phone plugs at the other end).
SWX-200P
SSA-350
Mic
SSA-350
Input
10
'Y' Cord
Aux-2 Input
Line Output
1V Input
SWX-200P
(A)
Place the subwoofers preferably in any corner on
the floor, with the reflecting port preferably not
facing the corners. Also, it is recommended to
place the two subwoofers together. Keeping them
far apart may result in the loss of bass effect at
some locations.
Set the crossover frequency of each subwoofer to
80Hz and adjust the volume control to deliver
optimum performance.
CD Player
'Y' Cord
1V Input
SWX-200P
(B)
Hide quick links:
Advertisement
