Charge Your Headset; Turning Your Headset On And Off; Pairing It With Your Phone - Jabra BT2090 User Manual

Instruction
Tap
Press
Press and hold

CHARGE YOUR HEADSET

Make sure that your headset is fully charged for two hours before
you start using it. Use the AC power supply to charge from a
power socket. When the battery indicator has a solid red light,
your headset is charging. When the headset is fully charged the
.
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset.
Please note: T
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.

TURNING YOUR HEADSET ON AND OFF

Slide the switch to the 'I' position to power on, and to the 'O' position
to power o .

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called
'pairing' . By following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1 Put the headset in pairing mode
- When you turn on your Jabra BT
headset will automatically start up on pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the Bluetooth status indication on the StatusDisplay™ is
.
Duration of press
Approx: 1 second
Approx: 5 seconds
9
JABRA BT2090
4