Connecting With Your Phone - Jabra BT2090 User Manual

2 Set your Bluetooth phone to 'discover' the Jabra BT2090
- Follow your phone's instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover new devices. This usually involves going
to a 'setup, ' 'connect' or 'Bluetooth' menu on your phone and
selecting the option to 'discover' or 'add' a Bluetooth device.*
3
-
Your phone then asks if you want to pair with the headset.
Accept by pressing 'Yes' or 'OK' on the phone. You may be asked
light to steady light.
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
SELECT
Manual pairing mode
pairing process was interrupted, you can manually set the headset
to pairing mode.
Make sure the headset is on. Press and hold the answer/end
button for approximately 5 seconds until the Bluetooth icon turns
the above pairing guide.

CONNECTING WITH YOUR PHONE

used together. When the headset and phone have been paired
once, they will automatically connect when the headset is on and
Bluetooth is activated on the phone. The headset can be used
when it is "connected" to the phone. If the devices are paired, but
do not immediately connect, tap the answer/end button. When
your headset is connected the Bluetooth connection icon in the
StatusDisplay™ will be constant on for 3 seconds.
* Phone dependent
DEVICES FOUND
Jabra BT2090
SELECT
JABRA BT2090
9
. Then use 0000 (4 zeros). Your
Jabra BT2090
Passkey:
****
OK
. Then repeat steps 2 and 3 in
BT2090".
Bluetooth
HANDSFREE
Jabra BT2090
added.
The handsfree is
now ready for use
SELECT
5