MSI IM-Q35 Series User Manual page 36

Audio Amplifier Connector: JAMP1
The JAMP1 is used to connect audio amplifiers to enhance audio performance.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
S/PDIF-Out Connector: JSPD1 (Optional, for HDMI ADD2 card only)
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission to the HDMI ADD2 card.
Pin Definition
PIN
1
1
2
3
JAMP1
4
GND 2 1 CINTRU
JCI1
2
GND
1
SPDIFO
JSPD1
Hardware Setup
SIGNAL
AMP_L-
AMP_L+
AMP_R-
AMP_R+
2-17