Healthrider Softstrider S150 HRTL06190 User Manual page 13

THE INFORMATION MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour.
To select the information mode, hold down the
PAUSE/STOP button while inserting the key into the
console. When the information mode is selected, the
following information will be shown:
The TIME display will show
the total number of hours
that the treadmill has been op-
erated.
The DISTANCE/INCLINE dis-
play will show the total num-
ber of miles that the walking
belt has moved.
The CALORIES/FAT CALO-
RIES display will show an ÒEÓ
for english miles or an ÒMÓ for
metric kilometers. To change
the unit of measurement,
press the SPEED + button.
IMPORTANT: The SPEED
display should be blank. If a
ÒdÓ appears in the display, the
console is in the ÒdemoÓ mode.
This mode is intended to be
used only when a treadmill is
used as a store display model. If the console is in the
demo mode, the power cord can be plugged in, the key
can be removed from the console, and the displays and
indicators on the console will automatically light in a
preset sequence, although the buttons on the console
will not operate. If a ÒdÓ appears in the SPEED display
when the information mode is selected, press the
SPEED Ð button so that the SPEED display is blank.
To exit the information mode, remove the key from the
console.
13