Healthrider Softstrider S150 HRTL06190 User Manual page 11

DISTANCE/INCLINE
displayÑThis display
shows the distance that
the walking belt has
moved and the incline
level of the treadmill.
Every seven seconds, the display will change
from one number to the other. The INCLINE indi-
cator will light when the incline is shown. Note: If
the speed is shown in mph, the distance will be
shown in miles; if the speed is shown in kph, the
distance will be shown in kilometers.
CALORIES/FAT
CALORIES displayÑ
This display shows the
numbers of calories and
fat calories you have
burned (see FAT
BURNING on page 18). Every seven seconds,
the display will change from one number to the
other. The FAT CALS indicator will light when the
number of fat calories is shown.
When you are finished exercising, stop the
6
walking belt and remove the key.
Step onto the foot rails and press the PAUSE/
STOP button. Next, change the incline of the
treadmill to 3%. The incline must be at 3%
when the treadmill is folded to the storage po-
sition or the treadmill will be damaged.
Remove the key from the console and put it in a
secure place. Move the on/off switch to the off po-
sition (see page 9).
HOW TO USE THE SPEED PROGRAMS AND
THE INCLINE PROGRAM
The Speed 1, Speed 2, and Speed 3 programs auto-
matically control the speed of the treadmill as they
guide you through effective workouts; the Incline 1 pro-
gram automatically controls the incline of the treadmill.
Follow the steps below to use a program.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page 9.
Select the desired pro-
2
gram.
To select a program,
press the SELECT + or Ð
button repeatedly until
the Speed 1, Speed 2,
Program
Speed 3, or Incline 1 pro-
Indicators
gram indicator is flashing.
Then, press the ENTER
button. Note: If the walk-
ing belt is moving when the SELECT buttons are
pressed, the walking belt will slow to a stop.
Adjust the maximum
3
speed or incline set-
ting.
If you selected the
Speed 1, Speed 2, or
Speed 3 program, a
number will begin to flash in the SPEED display.
This number shows the maximum speed that the
walking belt will reach during the program. The
maximum speed setting can be from 4 mph to 10
mph. If you want to change the maximum speed
setting, press the SELECT buttons. Then, press
the ENTER button. If the maximum speed setting
is increased, the difficulty level of the entire pro-
gram will increase.
If you selected the
Incline 1 program, a
number will begin to flash
in the DISTANCE/
INCLINE display. This number shows the maxi-
mum incline that the treadmill will reach during the
program. The maximum incline setting can be
from 6% to 10%. If you want to change the maxi-
mum incline setting, press the SELECT buttons.
Then, press the ENTER button. If the maximum in-
cline setting is increased, the difficulty level of the
entire program will increase.
11