Installing and Removing a Processor
Instructions on how to install the processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure the AC power has been
removed by unplugging the power cord from the computer; the standby power LED
should not be lit (see Figure 3 on page 23). Failure to do so could damage the
processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 25.
2. Open the socket lever by pushing the lever down and away from the socket
(Figure 6, A and B).
3. Lift the load plate (Figure 7, A). Do not touch the socket contacts (Figure 7, B).
Installing and Replacing Desktop Board Components
Figure 6. Lift Socket Lever
Figure 7. Lift the Load Plate
29