Vehicle; Road Types To Include/Exclude; Unpaved Roads; Motorways - Navfly N29050-V1 User Manual

5.4.3 Vehicle

You can set the type of the vehicle that you will use to navigate the route. Based
upon this setting, some of the road types will be excluded from the route (e.g.
motorways for pedestrians), or some of the restrictions may not be taken into account
(e.g. emergency vehicles have no restrictions). Available values:
• Car
• Taxi
• Bus
• Lorry
• Emergency
• Bicycle
• Pedestrian

5.4.4 Road types to include/exclude

To let the route fit your needs you can also set which road types are to be considered
for or to be excluded from the route if possible. When a road type is selected, its
lamp is green, if not, it turns red and is crossed-out as already described in 3.2.5.
Note: Excluding a route is a preference. It does not necessarily mean total prohibition.
If your destination can only be accessed using some of the excluded road types,
NAVFLY Navigator will use them but only as much as necessary. In this case a
warning icon will be shown on the Route Information screen (4.6), and the road not
matching your preference will be displayed in red (yellow at night) on the map.
5.4.4.1

Unpaved Roads

Unpaved roads are excluded by default, as they can be in a bad condition and you
usually cannot reach the speed limit on them.
5.4.4.2

Motorways

When driving a slow car or towing another vehicle, you may prefer not to take
motorways. In this case change the default green to red.
5.4.4.3

Ferries

The accessibility of temporary ferries is not necessarily included in the map data.
Furthermore you may need to pay fare, so you may consider disabling them from the
preset enabled status.
64