Off-Route Recalculation; Automatic; Ask First; Disabled - Navfly N29050-V1 User Manual

5.1.5 Off-route Recalculation

Once a route is planned, this setting will tell NAVFLY Navigator what to do when you
deviate from that route.
5.1.5.1

Automatic

The route will be recalculated automatically a few seconds after you go astray.
5.1.5.2

Ask First

NAVFLY Navigator can also ask your preference each time you leave the planned
route. The route will not be recalculated until you make your choice from the menu
that automatically appears (also explained in 4.6.2).
Your options are:
• Recalculate: NAVFLY Navigator will recalculate the route with the previous
settings. The result is the same as if Automatic recalculation was selected.
• Drop Next Via Point / Delete Route: NAVFLY Navigator will remove the next
via point from the list and recalculate the route without it. If you have only one
target left, the label of the button will be Delete Route, and it will end
navigation.
• Bypass: if you have deviated from the original route because of a traffic jam or
roadworks, you can instruct NAVFLY Navigator to avoid the original route for a
specified distance.
• Cancel: you can exit without recalculating the route. Navigation stops and will
be activated again when you find your way back to the original route.
5.1.5.3

Disabled

If you stick to the original route, and you wish to get back to it on your own, you can
disable recalculation. This way guidance will stop until you return to the
recommended route.
59